Ender3-V2-Stock-<date>.bin - FAQ and common problems
Mainboard Version 4.2.2
- Stock marlin configuration for Ender 3 v2
- Bed set to 225 x 225
- Adds G2 / G3 Arc support
- Adds G10 / G11 Firmware based retraction (Use M207, M208, M209 to configure)
- Adds M600 - Filament Change
- Adds M603 - Set Filament Load / Unload length
- Adds M701 - Load Filament
- Adds M702 - Unload Filament
- Enabled Advanced OK
- Enabled CLASSIC_JERK
- Enabled Linear Advance (2022-07-22 onwards) Use this tool to calibrate. Use this video as a guide.
- Enabled Smart Filament Runout Sensor (Add M412 S0 in your Start G-Code if you do not have a filament sensor).
- Uses hardware EEPROM, not emulated on SD Card.
- Added support for Meatpack (2020-01-27 onwards)
KNOWN ISSUES:
- If icons are missing in your screen, follow this forum thread
| Firmware Variant | Size | Build Date | Downloads | Feedback | Download |
|---|---|---|---|---|---|
| DWIN_SET.zip | 978136 bytes | 2025-09-10 00:36:54 UTC | 7228 |
Score: -1
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250910.bin | 179220 bytes | 2025-09-10 00:31:09 UTC | 0 |
Score: 0
|
Membership Required |
commit 4ce809380b01df1f7cfdaa0255fbebe76957e6e7 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Tue Sep 9 00:30:19 2025 +0000 [cron] Bump distribution date (2025-09-09) |
|||||
| Ender3-V2-Stock-20250910.bin | 167164 bytes | 2025-09-10 00:30:39 UTC | 0 |
Score: 0
|
Membership Required |
commit 4ce809380b01df1f7cfdaa0255fbebe76957e6e7 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Tue Sep 9 00:30:19 2025 +0000 [cron] Bump distribution date (2025-09-09) |
|||||
| Ender3-V2-Stock-MarlinUI-20250909.bin | 179220 bytes | 2025-09-09 00:31:11 UTC | 0 |
Score: 0
|
Membership Required |
commit a614352fcfe1cab116984a2dece6cceebfa2840a Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sun Sep 7 22:26:22 2025 -0500 🧑💻 Some FT Motion renames To reduce changes in #28043 commit a54daeeb39d47f2662ab1e15ffec8be717ed2c2c Author: narno2202 <130909513+narno2202@users.noreply.github.com> Date: Mon Sep 8 03:38:37 2025 +0200 ⚡️ Optimize FT Motion load block data (#27991) commit fc4abd13352b07a5494aaec15945b4bbcc4b7cb2 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Mon Sep 8 00:32:06 2025 +0000 [cron] Bump distribution date (2025-09-08) |
|||||
| Ender3-V2-Stock-20250909.bin | 167164 bytes | 2025-09-09 00:30:40 UTC | 0 |
Score: 0
|
Membership Required |
commit a614352fcfe1cab116984a2dece6cceebfa2840a Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sun Sep 7 22:26:22 2025 -0500 🧑💻 Some FT Motion renames To reduce changes in #28043 commit a54daeeb39d47f2662ab1e15ffec8be717ed2c2c Author: narno2202 <130909513+narno2202@users.noreply.github.com> Date: Mon Sep 8 03:38:37 2025 +0200 ⚡️ Optimize FT Motion load block data (#27991) commit fc4abd13352b07a5494aaec15945b4bbcc4b7cb2 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Mon Sep 8 00:32:06 2025 +0000 [cron] Bump distribution date (2025-09-08) |
|||||
| Ender3-V2-Stock-MarlinUI-20250908.bin | 179220 bytes | 2025-09-08 00:31:10 UTC | 0 |
Score: 0
|
Membership Required |
commit 881ee69f34653a0c6ceb6883549ffae6ed96178f Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Sep 6 18:17:32 2025 -0500 ✨ SENSORLESS_STALLGUARD_DELAY commit 5a8b9d649a86011abdb9508f1008004c125162fa Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Sun Sep 7 00:32:58 2025 +0000 [cron] Bump distribution date (2025-09-07) |
|||||
| Ender3-V2-Stock-20250908.bin | 167164 bytes | 2025-09-08 00:30:40 UTC | 0 |
Score: 0
|
Membership Required |
commit 881ee69f34653a0c6ceb6883549ffae6ed96178f Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Sat Sep 6 18:17:32 2025 -0500 ✨ SENSORLESS_STALLGUARD_DELAY commit 5a8b9d649a86011abdb9508f1008004c125162fa Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Sun Sep 7 00:32:58 2025 +0000 [cron] Bump distribution date (2025-09-07) |
|||||
| Ender3-V2-Stock-MarlinUI-20250907.bin | 179220 bytes | 2025-09-07 00:31:28 UTC | 0 |
Score: 0
|
Membership Required |
commit e80d8e9dcf6fb4328592b254d475568174aa9b34 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Sun Sep 7 06:22:45 2025 +1200 🐛 Fix UART pins for GD32 MFL (#28011) commit 950d141958350235bf0752d85d7d45caffcfe80c Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Sat Sep 6 06:08:36 2025 +0000 [cron] Bump distribution date (2025-09-06) commit 52ea53a3dd95caffe0bc7ec0c2036eea488cb0be Author: Thijs Triemstra <info@collab.nl> Date: Sat Sep 6 05:14:09 2025 +0200 🎨 Spelling corrections (#28026) commit 7526309ccf38a6384d457f6f15c8f9eed5e9e76c Author: Andrew <18502096+classicrocker883@users.noreply.github.com> Date: Fri Sep 5 23:00:28 2025 -0400 🧑💻 Tweaks to our aging Arduino SdFat Library code (#28031) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> commit 4342a0f51287330ba013134933ed172839c79ff0 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Sat Sep 6 14:13:16 2025 +1200 🩹 Fix RAMPS MINIPANEL BEEPER_PIN (#28033) commit 4bca73dc5a88bb68918a0873e93636b0a7367044 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Fri Sep 5 20:30:39 2025 -0500 ✅ Validate source formatting (#28028) commit 67dc3e432f71463354333e27d36efd1a733e11f3 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Sat Sep 6 13:27:16 2025 +1200 🔧 Fix bad Config.h sanity-check (#28027) |
|||||
| Ender3-V2-Stock-20250907.bin | 167164 bytes | 2025-09-07 00:30:57 UTC | 0 |
Score: 0
|
Membership Required |
commit e80d8e9dcf6fb4328592b254d475568174aa9b34 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Sun Sep 7 06:22:45 2025 +1200 🐛 Fix UART pins for GD32 MFL (#28011) commit 950d141958350235bf0752d85d7d45caffcfe80c Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Sat Sep 6 06:08:36 2025 +0000 [cron] Bump distribution date (2025-09-06) commit 52ea53a3dd95caffe0bc7ec0c2036eea488cb0be Author: Thijs Triemstra <info@collab.nl> Date: Sat Sep 6 05:14:09 2025 +0200 🎨 Spelling corrections (#28026) commit 7526309ccf38a6384d457f6f15c8f9eed5e9e76c Author: Andrew <18502096+classicrocker883@users.noreply.github.com> Date: Fri Sep 5 23:00:28 2025 -0400 🧑💻 Tweaks to our aging Arduino SdFat Library code (#28031) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> commit 4342a0f51287330ba013134933ed172839c79ff0 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Sat Sep 6 14:13:16 2025 +1200 🩹 Fix RAMPS MINIPANEL BEEPER_PIN (#28033) commit 4bca73dc5a88bb68918a0873e93636b0a7367044 Author: Scott Lahteine <thinkyhead@users.noreply.github.com> Date: Fri Sep 5 20:30:39 2025 -0500 ✅ Validate source formatting (#28028) commit 67dc3e432f71463354333e27d36efd1a733e11f3 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Sat Sep 6 13:27:16 2025 +1200 🔧 Fix bad Config.h sanity-check (#28027) |
|||||
| Ender3-V2-Stock-MarlinUI-20250906.bin | 179212 bytes | 2025-09-06 00:31:12 UTC | 0 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250906.bin | 167244 bytes | 2025-09-06 00:30:41 UTC | 0 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250905.bin | 179212 bytes | 2025-09-05 00:31:08 UTC | 1 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250905.bin | 167244 bytes | 2025-09-05 00:30:37 UTC | 1 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250904.bin | 179212 bytes | 2025-09-04 00:31:11 UTC | 0 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250904.bin | 167244 bytes | 2025-09-04 00:30:40 UTC | 0 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250903.bin | 179212 bytes | 2025-09-03 00:31:06 UTC | 0 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250903.bin | 167244 bytes | 2025-09-03 00:30:35 UTC | 0 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250902.bin | 179212 bytes | 2025-09-02 00:31:07 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250902.bin | 167244 bytes | 2025-09-02 00:30:37 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250901.bin | 179212 bytes | 2025-09-01 00:31:08 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250901.bin | 167244 bytes | 2025-09-01 00:30:38 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250831.bin | 179212 bytes | 2025-08-31 00:31:05 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250831.bin | 167244 bytes | 2025-08-31 00:30:35 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250830.bin | 179212 bytes | 2025-08-30 00:31:10 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250830.bin | 167244 bytes | 2025-08-30 00:30:40 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250829.bin | 179212 bytes | 2025-08-29 00:31:08 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250829.bin | 167244 bytes | 2025-08-29 00:30:38 UTC | 3 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250828.bin | 179212 bytes | 2025-08-28 00:31:10 UTC | 2 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-20250828.bin | 167244 bytes | 2025-08-28 00:30:39 UTC | 2 |
Score: 0
|
Membership Required |
| Ender3-V2-Stock-MarlinUI-20250827.bin | 179212 bytes | 2025-08-27 00:31:38 UTC | 4 |
Score: 0
|
Membership Required |
commit 349c3a724316dfeefdd448a6918c4fb3a2705c49 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Tue Aug 26 18:09:58 2025 +0000 [cron] Bump distribution date (2025-08-26) commit 1bee2dab602241223cf3c31ae6ef4919d0b7195e Author: Vovodroid <vovodroid@users.noreply.github.com> Date: Tue Aug 26 20:33:28 2025 +0300 🩹 Fix PLR Z move precision (#27965) commit 1e51ff1306416d6df9e764cf51836a6b864a6e79 Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com> Date: Tue Aug 26 10:28:49 2025 -0700 🔧 Creality UI string heading & title options (#27944) commit aa0558eb3a6580a111d63e4c32b9317cb5e3d753 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Wed Aug 27 05:17:27 2025 +1200 ✨ Creality v252 board (2) (#28016) Followup to #27996 |
|||||
| Ender3-V2-Stock-20250827.bin | 167244 bytes | 2025-08-27 00:31:07 UTC | 3 |
Score: 0
|
Membership Required |
commit 349c3a724316dfeefdd448a6918c4fb3a2705c49 Author: thinkyhead <thinkyhead@users.noreply.github.com> Date: Tue Aug 26 18:09:58 2025 +0000 [cron] Bump distribution date (2025-08-26) commit 1bee2dab602241223cf3c31ae6ef4919d0b7195e Author: Vovodroid <vovodroid@users.noreply.github.com> Date: Tue Aug 26 20:33:28 2025 +0300 🩹 Fix PLR Z move precision (#27965) commit 1e51ff1306416d6df9e764cf51836a6b864a6e79 Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com> Date: Tue Aug 26 10:28:49 2025 -0700 🔧 Creality UI string heading & title options (#27944) commit aa0558eb3a6580a111d63e4c32b9317cb5e3d753 Author: ellensp <530024+ellensp@users.noreply.github.com> Date: Wed Aug 27 05:17:27 2025 +1200 ✨ Creality v252 board (2) (#28016) Followup to #27996 |
|||||